Before You Begin
The installation kit contains a registration card, the ST-600 series device, 2 well nuts with screws, and two self-tapping screws.
Additional tools and supplies you may need include a fine-tip marker, centerpunch, and a ladder.
For device activation and registration, obtain the Install Key from your GPS Administrator and bookmark the Verify GPS Web App (https://verifygps.gpsinsight.com) on your smartphone.
Installation Overview
The following steps provide an overview of the installation process:
- Install Preparation.
- Device Mounting.
- Activation and Registration
Installation Steps
1. Installation Preparation.
- Complete the registration card by locating the 19-digit serial number.
- Identify a suitable mounting location that is horizontal to the ground, has an unobstructed view of the sky, is not a removable panel, and will not be damaged during normal operation of the asset.
- Inspect the area directly beneath the mounting location to ensure nothing will be damaged during installation.
Covert Installation: Though the device may report accurately in covertly installed locations, we do not recommend this type of installation due to the potential for lost data and/or diminished battery life.
- Complete the registration card by locating the 19-digit serial number.
2. Device Mounting.
- Position the mounting bracket and mark the position of the two holes.
- Secure the device to the asset with screws.
3. Activation and Registration.
- Open the GPS Insight VerifyGPS Web App via your smartphone or computer, then enter following information and follow the prompts to register the device.
- Enter your Install Key.
- Enter the Device Serial Number.
- Select Device Type: ST-600.
- Click ‘Next’ and follow the prompts to verify and register the device.
- Upon successful registration, give the registration card to your GPS administrator.
Device will not appear on the map initially. It takes ~6 hours of direct sunlight to start reporting and ~60 hours of sunlight to fully charge the battery.
- Open the GPS Insight VerifyGPS Web App via your smartphone or computer, then enter following information and follow the prompts to register the device.